Friday, October 12, 2007

Water Damaged Cell Phone Tips That May Save Your Phone

If your cell phone has been submersed in water recently and you have managed to save it yourself, then good for you. But, there are some other tips that you might want to know just in case.

Another method for helping the phone dry out (if you do not have any rice on hand) is to put it on top of the vent on a monitor or a television for at least 24 hours. The low amount of heat put out by these devices should be enough to gently dry out the phone.

If you are the kind of person who keeps the silica packs that come packed in electronics, coats, shoes, and etcetera, you can put the phone into a plastic bag with a couple of these and let them absorb the moisture over a couple of days. If you do not have these on hand, a local craft store should have a flower drying kit that will contain a silica sand-type mixture. Put it in a Tupperware dish, use a dryer sheet, lay the phone on top of it, and seal it.

Corrosion is a definite threat to cell phones and other electronics and some people have suggested that you wash the phone in distilled water to wash away any kind of minerals that might have existed in the water or other liquid the phone was originally submersed in. If you choose to try this, do it only after you have removed the SIM card and battery.

If the battery is wet, do NOT heat it to try and dry it out. Batteries, especially lithium-ion ones, are quite sensitive and they very well may explode if you try to speed up the drying process in this manner.

If you choose to use alcohol to clean off parts of the phone that are sticky with soda or another similar liquid, do not apply heat to the device in any way. Do not reattach the battery until the smell of alcohol is completely gone.

This might also seem like common sense, but do not put any electronic device into the microwave. You will probably destroy not only your device, but even your microwave could be put at risk.

You should be aware that most phone warranties do not cover water damaged phones and that most phones today have special stickers inside them (only one visible to you) that will tell a technician if the phone has come into contact with water or even just too much humidity. Be careful when taking your phone outdoors when humidity is very high. It is possible to void your warranty.


Jim Corkern is a writer and promoter of quality
New Jersey Sewage Damage Cleanup and other states such as
New York mold remediation companies across the united states.

Easy Ways To Maintain A Smoke Free Fireplace

Quite a few homes have fireplaces, but not all of them are fit to be used as they are because they have not been cleaned in so long that when you do try to use them, it fills the house with smoke. This can do a lot of damage to the inside of the home, including ruin the paint on your walls, your curtains, and discolor your carpet. It is also a health risk, since breathing this in is not good for anyone, but the elderly, people with allergies, pets, and children are especially affected. Fortunately, though, in most situations you can make a fire that will not smoke up your house without much trouble as long as you follow a few rules.

The damper of your chimney needs to be open before you do anything. Burn some paper or other easily combustible materials in the fireplace, because you want to warm the chimney up. Cold air in the chimney is will push the warm air down and cause the smoke to fill up the room.

Open up the windows in the house and make sure that there is enough air circulating to ignite the fire. A home that is insulated well might not have enough of a draft to allow the wood to catch on fire.

You should also have some fireplace bricks underneath the grill to add some more air circulation to the process. More draft in the fireplace will make it easier for the fire to ignite.

The top of the fireplace also needs to be cleaned out regularly, since anything that gets stuck in it like leaves, sticks, bird nests can keep the smoke from being able to escape and so it floods back into the house, which is exactly where you do not want it.

You should also have the fireplace cleaned by a professional cleaning service if possible, since a layer of creosote is likely built up on the inside of the chimney. This is a tar-like substance that results from burning wood in the fireplace and if your chimney has not been professionally cleaned before and you have lived in your house for many years, then it is time for it to be. Creosote can catch on fire and cause the whole house to burn down, so having it cleaned out is essential.

To keep your fireplace functioning the way that it should, you need to know how to use it and take care of it and by the time winter gets to you, you will be able to enjoy your fireplace once again.


Jim Corkern is a writer and respected contributor to the Water damage restoration and mold remediation Industry. Visit his sites for more information.
http://www.floodingnc.info
http://www.floodnj.info

Things You Should Know About Water Damage And Your Computer

Water or almost any other kind of liquid is not a great thing to have around your computer or any other electronic device. This kind of damage can be expensive to either replace or to have repaired and unfortunately, many people who are unfortunate enough to have this happen to them cannot afford it.

If the liquid spilled upon the device is acidic, like soda or coffee, then it generally does more damage than simple water would do. It causes more corrosion to the metal areas of the motherboard or any other computer component such as the hard drive or CD-ROM.

One of the worst case scenarios is that you spill a liquid onto your laptop where everything, motherboard, hard drive, CD-ROM, and etcetera are all packed into the same general area. In most cases of water damage to computers, the liquid is spilled merely on the keyboard or another outside component such as the mouse. With laptops, spilling a liquid on the keyboard does not mean that only the keyboard is affected, but also the other components sharing the shell of the laptop are, as well. What can you do if water or another liquid is spilled on your laptop?

Unplug it from the A/C adapter and remove the battery IMMEDIATELY. Unplug any other external devices including external hard drives, mice, other input devices, CD-ROMs, DVD-ROMs, and etcetera. The next thing is to turn the laptop completely upside down to stop the liquid from sinking any further into it.

Use a towel or paper towels to clean up the spilled liquid, wipe off the keyboard, exterior, and any external devices that came into contact with the liquid as well.

At this point, you could do one of two things. You could take it to a professional repairman and have them look at it (I hope you have an extra arm and leg lying around) or if you know how to take something apart and put it back together, you can try to fix it yourself. In trying to fix it, you may irreparably damage it, so if you are even remotely unsure about your ability to repair it, it is better to take it to a professional.

If you choose the do-it-yourself route, disassemble the computer and allow it to dry out completely for at least 24 hours, if not longer. Let it dry until you are satisfied that it is completely done. Whatever you do, do not turn the power on before it is. It is not water itself that kills the circuit board of any electronic device, but the electricity that runs through it when someone tries to turn the device on when it is still wet.

If it was just water, drying should be all it needs. If it was soda or any other acidic liquid, clean it with rubbing alcohol and Q-tips, then put it back together and wait for the alcohol to dry. See if it works.


Jim Corkern is a writer and promoter of quality
North Carolina Water Damage Restoration and other states such as
New Jersey Water Damage Restoration companies across the united states.